Section
02
Operating this unit
SLA (source level adjustment)
SLA (Source level adjustment) lets you adjust the vo- lume level of each source to prevent radical changes in volume when switching between sources.
!Settings are based on the FM volume level, which remains unchanged.
Before adjusting source levels, compare the FM volume level with the level of the source you wish to adjust.
!The AM volume level can also be adjusted with source level adjustments.
1Push M.C. up or down to adjust the source vo- lume.
Adjustment range: +4 to
Note
When selecting FM as the source, you cannot switch to SLA. 
Initial Settings
1
1Function display
! Shows the function status.
1Press SRC/OFF and hold until the unit turns off.
2Press M.C. and hold until the initial set- ting menu appears in the display.
3Turn M.C. to select the initial setting. After selecting, perform the following proce- dures to set the initial setting.
Language select (multi language)
For your convenience, this unit equips multiple lan- guage display. You can select the language best sui- ted to your first language.
1Press M.C. to select the language.
16
En
Calendar (setting the date)
1Push M.C. left or right to select the segment of the calendar display you wish to set.
2Push M.C. up or down to set the date.
Clock (setting the clock)
1Push M.C. left or right to select the segment of the clock display you wish to set.
2Push M.C. up or down to put a clock right.
!You can match the clock to a time signal by press- ing M.C.
!If 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)
!If 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)
EngineTime alert (elapsed time display setting)
This setting allows you to measure the length of time that elapses from when the machine is turned on and display the amount of elapsed time per set period.
Also, you will hear alarm.
1Press M.C. to select your favorite setting.
USB plug&play (plug and play)
This setting allows you to switch your source to USB/ IPOD automatically.
1Press M.C. to turn the plug and play on or off.
!ON – When USB storage device/iPod is con- nected, the source is automatically switched to USB/IPOD. If you disconnect your USB sto- rage device/iPod, this unit’s source is turned off.
!OFF – When USB storage device/iPod is con- nected, the source is not switched to USB/ IPOD automatically. Please change the source to USB/IPOD manually.
Warning tone (warning tone setting)
If the front panel is not detached from the head unit within four seconds of turning off the ignition, a warn- ing tone sounds. You can turn off the warning tone.
1Press M.C. to turn the warning tone on or off.
AUX1/AUX2 (auxiliary input setting)
Activate this setting when using auxiliary device con- nected to this unit.
1Press M.C. to turn auxiliary setting on or off.
Dimmer (dimmer setting)
