Section
03
Available accessories
For details concerning operation, refer to the XM tuner’s operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuner’s operation manual.
Storing and recalling broadcast stations
You can easily store up to six stations for each band as presets.
!Six stations for each band can be stored in memory.
Basic Operations
|
|
| 1 Press (list). |
1 | 2 | 3 4 | Preset screen is displayed. |
5
1XM band indicator
2XM channel number indicator
3XM preset number indicator
4XM channel select setting indicator
Shows what channel select setting has been selected. CH is displayed when
Channel number is selected, and CAT is dis- played when Category is selected.
5XM text information
Shows the text information of broadcast channel.
Select an XM band.
1Press BAND/ESC.
!Band can be selected from
Select a channel.
1Push M.C. left or right.
!If you push and hold M.C. left or right, you can increase or decrease channel number continuously.
!You can also perform tuning from a desired channel category. (Refer to Selecting a chan- nel in the channel category on the next page.)
Switching the XM display
1Press and hold DISP/
/SCRL.
2Use M.C. to store the selected station in memory.
Turn to change the preset number. Press and hold to store.
3Use M.C. to select the desired station.
Turn to change the station; press to select.
# You can also change the station by pushing M.C. up or down.
Advanced operations using special buttons
Selecting the XM channel select mode
1Press S.Rtrv/SAT MODE to cycle between: Channel number (channel number select set-
Function and operation
1Press M.C. to display the main menu.
2Use M.C. to select FUNCTION.
The function selection menu is displayed. Turn to change the menu option. Press to select.
3 Turn M.C. to select the function. After selecting, perform the following proce- dures to set the function.
En