Operating Other Manufacturers’ Video Equipment
English
By changing the transmission signals, you can use the remote control supplied for this unit to operate other manufacturers’ equipment.
•Refer also to the manuals supplied for the other products.
•To operate these components with the remote control, first you need to set the manufacturers’ code each for TV, CATV converter, VCR and DVD player.
•When replacing the batteries in the remote control, set the manufacturers’ codes again.
To change the transmission signals for operating a TV
1Set TV/CATV selector to “TV.”
2Press and hold STANDBY/ON 
TV/CATV.
3Press TV SOUND.
4Enter manufacturer’s codes using buttons 1 – 9, and 0.
5Release STANDBY/ON 
TV/CATV.
Now, you can perform the following operations on the TV.
STANDBY/ON |
|
| TV/CATV |
|
|
| Turn on or off the TV. |
|
| ||
TV/VIDEO | Set the input mode (either TV or | ||
|
|
| VIDEO). |
|
| ||
TV VOLUME +/– | Adjust the volume. | ||
|
| ||
TV/CATV CH +/– | Change the channels. | ||
|
|
|
|
After pressing TV SOUND, you can perform the following operations on the TV:
1 – 9, 0, +10 (100+) | Select a channel. |
ENTER (10) | Function as the ENTER button. |
|
|
Note:
Refer also to the manual supplied with your TV.
6Try to operate your TV by pressing
STANDBY/ON 
TV/CATV.
When your TV turns on or off, you have entered the correct codes.
If more than one code is listed for your brand of TV, try
each one until the correct one is entered.
Manufacturers’ codes for TV
Manufacturer | Codes |
JVC | 01* |
Hitachi | 10 |
Magnavox | 02 |
Mitsubishi | 03 |
Panasonic | 04, 11 |
RCA | 05 |
Samsung | 12 |
Sanyo | 13 |
Sharp | 06 |
Sony | 07 |
Toshiba | 08 |
Zenith | 09 |
*“01” is the initial setting.
To change the transmission signals for operating a CATV converter
1Set TV/CATV selector to “CATV.”
2Press and hold STANDBY/ON 
TV/CATV.
3Press TV SOUND.
4Enter manufacturer’s codes using buttons 1 – 9, and 0.
5Release STANDBY/ON 
TV/CATV.
Now, you can perform the following operations on the CATV converter.
STANDBY/ON 
TV/CATV
Turn on or off the CATV converter.
TV/CATV CH +/– Change the channels.
After pressing TV SOUND, you can perform the following operations on the CATV converter:
1 – 9, 0, +10 (100+) | Select the channels. |
ENTER (10) | Function as the ENTER button. |
|
|
Note:
Refer also to the manual supplied with your CATV converter.
6Try to operate your CATV converter by
pressing STANDBY/ON 
TV/CATV.
When your CATV converter turns on or off, you have entered the correct codes.
If more than one code is listed for your brand of CATV
converter, try each one until the correct one is entered.
Manufacturers’ codes for CATV converter
Manufacturer | Codes |
Echostar | 01* |
General Instrument | 02, 03, 04, 05, |
| 06, 07, 08, 09 |
Hamlin | 16, 17, 18, 19 |
Pioneer | 14, 15 |
RCA | 20 |
Scient | 10, 11 |
Sony | 21 |
Zenith | 12, 13 |
*“01” is the initial setting.
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
36
