SETUP PAGE
Routing Channels to Outputs
Introduction - basics
The main purpose of the output section is routing of the physical, DAW and FireWire input channels to the physical outputs. Starting from left going to right we have the:
-the Source select that allows you to select the input you intend to route
-the option of routing source signal to any of the three speaker sets A, B, C and furthermore setting individual trim and delay for each source
-giving the outputs personal labels
.....let us take a look at each element of the Output
section in detail.
6Link button
This button allows you to link/unlink channel pairs.
Example: Typically, you would prefer having main outputs linked, but you may unlink main L and main R if individual delay or trim is needed.
Linked
Unlinked
7Source select
Via the source select drop down menu you select the signal you are about to route. The options are:
Physical:
These are the physical inputs on Studio Konnekt 48.
18
