TC electronic SDN BHD 48 Encoder and Lightring, Speaker SET select, AUX 2 Shift + Effect

STUDIO KONTROL

9ENCODER and LIGHTRING

The encoder is used to change values for the selected parameter or function. The encoder and lightring have various secondary functions when pressed once.

Dim function:

Master, aux 1 , aux 2 and Main mix can have can have an individual dimmed level setting. Press the encoder to go to dimmed mode and once more to exit. Dim mode is also indicated on the lightring. See illustration below.

Not dimmed				Dimmed
	P2	P3			P2	P3
MIC				MIC
			PROG				PROG
			(P1-P3				(P1-P3)

NEL NEL

The dimmed level cannot be set higher that the normal level.

10PANEL

Once you have the TC Near control panel opened, the PANEL button is a convenient way to maximize the control panel on top of your DAW application - and minimize it again. No need to use mouse or keyboard.

11SPEAKER SET select

• Press and hold:

while pressing: or or

to select speaker sets.

12 M. MIX - (MON MIX)

The level control for the mixer outputs.

AUX 1 - (SHIFT + M. MIX)

Level control for the AUX 1 channel.

13EFFECT

Controls the Fabrik R Studio return level on the Main Mix channel.

AUX 2 - (SHIFT + EFFECT)

Level control for the AUX 2 channel.

14TALK

When activating the talkback function you most likely want to attenuate the mix level in the performer’s headphones. The Dim Level function sets this level. The dim level can never be set higher than the normal level.

The AUX sends are typically used for setting individual mix levels on the two headphones outputs. The AUX 1, AUX 2 and MAIN buttons determine to which outputs the talkback signal should be sent.

Press the TALK switch on the Studio Kontrol or on the mixer.

Momentary or latching

Unlike all other functions the Studio Kontrol will not

36