HP 10/100 3Com 3C905C-TX Network Interface Card Installation Guide

Overview of the Installation ProcedureNon-Supported Network DriversThe following network drivers are provided on theEtherDisk® diskettes but are not supported by HP:

Network Operating System

Network Driver Name

 

 

Banyan VINES

EL90X.DOS

 

 

Artisoft LANtastic

EL90X.DOS

 

 

IBM LAN SERVER (DOS)

EL90X.DOS

 

 

IBM LAN SERVER (OS/2)

EL90X.OS2

 

 

DEC PATHWORKSEL90X.DOS (DOS) and

 

3C90X.COM (Netware)

 

 

Overview of the Installation Procedure

CAUTION Your PC and network interface card can be permanently damaged by static electricity. Before handling the card, touch the unpainted part of your PC’s metal chassis. Maintain grounding by wearing a wrist strap attached to the chassis. Handle the card by its backplate and top edge. Do not touch the edge connector.

Installing the 3C905C-TX NIC is a 4-step process. You need to:•Install the card in your PC.•Connect the card to the network.•Update LAN-specific fields in the HP PC Setup utility.•Install the driver software.

After you complete the installation, you can use the NIC Doctor software to troubleshoot any problems.

English 7