set {ap dap} force-image-download

Configures an AP to download its software image from the DWS-1008 instead of loading the image that is locally stored on the AP.

Syntax: set {ap port-list dap {dap-num auto}} force-image-download {enable disable}

ap port-list

List of AP access ports.

dap dap-num

Number of a Distributed AP.

dap auto

Configures forced image download for the AP configuration

 

profile.

force-image-download enable

Enables forced image download.

force-image-download disable

Disables forced image download.

Defaults: Forced image download is disabled by default.

Access: Enabled

Usage: A change to the forced image download option takes place the next time the AP is restarted. Even when forced image download is disabled (the default), the AP still checks with the DWS-1008 to verify that the AP has the latest image.

Examples: The following command enables forced image download on Distributed AP 69:

DWS-1008# set dap 69 force-image-download enable success: change accepted.

See Also:

• show {ap dap} config

D-Link DWS-1008 CLI Manual

322

Page 325
Image 325
D-Link dws-1008 manual Set ap dap force-image-download, Dap auto, Force-image-download enable, Force-image-download disable