D-Link dws-1008 manual Clear interface, Removes an IP interface, Syntax clear interface vlan-idip

IP Services Commands

Use IP services commands to configure and manage IP interfaces, management services, the Domain Name Service (DNS), Network Time Protocol (NTP), and aliases, and to ping a host or trace a route. This chapter presents IP services commands alphabetically.

clear interface

Removes an IP interface.

Syntax: clear interface vlan-idip

vlan-idVLAN name or number.

Defaults: None.

Access: Enabled.

Usage: If the interface you want to remove is configured as the system IP address, removing the address can interfere with system tasks that use the system IP address, including the following:

•Topology reporting for dual-homed access points

•Default source IP address used in unsolicited communications such as AAA accounting reports and SNMP traps

Examples: The following command removes the IP interface configured on VLAN mauve:

DWS-1008# clear interface mauve ip success: cleared ip on vlan mauve

See Also:

•set interface

•set interface status

•show interface

D-Link DWS-1008 CLI Manual 77