D-Link dws-1008 manual Set dot1x port-control, Clear dot1x max-req Show dot1x

Forces the specified wired authentication port(s) to unconditionally reject all 802.1X authentication attempts with an EAP failure message.

Allows the specified wired authentication ports to process 802.1X authentication normally as determined for the user by the set authentication dot1X command.

One or more wired authentication ports for which to set 802.1X port control.

Forces the specified wired authentication port(s) to unconditionally authorize all 802.1X authentication attempts, with an EAP success message.

See Also:

•clear dot1x max-req

•show dot1x

set dot1x port-control

Determines the 802.1X authentication behavior on individual wired authentication ports or groups of ports.

Syntax: set dot1x port-control {forceauth forceunauth auto} port-listforceauth

forceunauth

auto

port-list

Defaults: By default, wired authentication ports are set to auto.

Access: Enabled.

Usage: This command affects only wired authentication ports.

Examples:The following command forces port 6 to unconditionally accept all 802.1X authentication attempts:

DWS-1008# set dot1x port-control forceauth 6 success: authcontrol for 19 is set to FORCE-AUTH.

See Also:

•show port status

•show dot1x

D-Link DWS-1008 CLI Manual 248