interval time

Time interval between ping packets, in milliseconds. You can specify from

 

100 through 10,000.

size size

Packet size, in bytes. You can specify from 56 through 65,507.

 

Note: Because the switch adds header information, the ICMP packet size

 

is 8 bytes larger than the size you specify.

source-ipip-addrIP address, in dotted decimal notation, to use as the source IP address in the ping packets.

source-ipvlan-nameVLAN name to use as the ping source. MSS uses the IP address configured on the VLAN as the source IP address in the ping packets.

Defaults:

count—5.

dnf—Disabled.

interval—100 (one tenth of a second)

size—56.

Access: Enabled.

Usage: To stop a ping command that is in progress, press Ctrl+C. A DWS-1008 switch cannot ping itself. MSS does not support this.

Examples: The following command pings a device that has IP address 10.1.1.1:

DWS-1008#ping 10.1.1.1

PING 10.1.1.1 (10.1.1.1) from 10.9.4.34 : 56(84) bytes of data.

64 bytes from 10.1.1.1: icmp_seq=1 ttl=255 time=0.769 ms

64 bytes from 10.1.1.1: icmp_seq=2 ttl=255 time=0.628 ms

64 bytes from 10.1.1.1: icmp_seq=3 ttl=255 time=0.676 ms

64 bytes from 10.1.1.1: icmp_seq=4 ttl=255 time=0.619 ms

64 bytes from 10.1.1.1: icmp_seq=5 ttl=255 time=0.608 ms

--- 10.1.1.1 ping statistics ---

5 packets transmitted, 5 packets received, 0 errors, 0% packet loss

See Also:

• traceroute

D-Link DWS-1008 CLI Manual

86

Page 89
Image 89
D-Link dws-1008 manual Size size, Is 8 bytes larger than the size you specify, Defaults, DWS-1008#ping