D-Link dws-1008 Show log config, DWS-1008#show log buffer facility ?, DWS-1008#show log config

Usage: The debug level produces a lot of messages, many of which can appear to be somewhat cryptic. Debug messages are used primarily by D-Link for troubleshooting and are not intended for administrator use.

Examples: Type the following command to see the facilities for which you can view event messages archived in the buffer:

DWS-1008#show log buffer facility ?

<facility name> Select one of: KERNEL, AAA, SYSLOGD, ACL, APM,

ARP, ASO, BOOT, CLI, CLUSTER, CRYPTO, DOT1X, NET, ETHERNET, GATEWAY, HTTPD, IGMP, IP, MISC, NOSE, NP, RAND, RESOLV, RIB, ROAM, ROGUE, SM,

SNMPD, SPAN, STORE, SYS, TAGMGR, TBRIDGE, TCPSSL, TELNET, TFTP, TLS, TUNNEL, VLAN, X509, XML, AP, RAPDA, WEBVIEW, EAP, FP, STAT, SSHD,

SUP, DNSD, CONFIG, BACKUP.

The following command displays logged messages for the AAA facility:

DWS-1008#show log buffer facility AAA

AAAJun. 25 09:11:32.579848 ERROR AAA_NOTIFY_ERR: AAA got SM special event (98) on locality 3950 which is gone

See Also:

•clear log

•show log config

show log config

Displays log configuration information.

Syntax: show log config

Defaults: None.

Access: Enabled.

Examples: To display how logging is configured, type the following command:

DWS-1008#show log config

Logging console: disabled

Logging console severity: DEBUG

Logging sessions: disabled

Logging sessions severity: INFO

Logging buffer: enabled

Logging buffer severity: WARNING

Logging trace: enabled

Logging trace severity: DEBUG

Logging buffer size: 10485760 bytes

Log marking: disabled

Log marking severity: NOTICE

Log marking interval: 300 seconds

Logging server: 172.21.12.19 port 514 severity EMERGENCY

Current session: disabled

Current session severity: INFO

D-Link DWS-1008 CLI Manual 510