clear authentication admin

Removes an authentication rule for administrative access through Telnet or Web View.

Syntax: clear authentication admin user-glob

user-globA single user or set of users.

Specify a username, use the double-asterisk wildcard character (**) to specify all usernames, or use the single-asterisk wildcard character (*) to specify a set of usernames up to or following the first delimiter character, either an at sign (@) or a period (.).

Defaults: None.

Access: Enabled.

Note: The syntax descriptions for the clear authentication commands have been separated for clarity. However, the options and behavior for the clear authentication admin command are the same as in previous releases.

Examples: The following command clears authentication for administrator Jose:

DWS-1008# clear authentication admin Jose success: change accepted.

See Also:

clear authentication console

clear authentication dot1x

clear authorization mac

clear authentication web

set authentication admin

show aaa

clear authentication console

Removes an authentication rule for administrative access through the Console.

Syntax: clear authentication console user-glob

user-globA single user or set of users. Specify a username, use the double-asterisk wildcard character (**) to specify all usernames, or use the single-asterisk wildcard character (*) to specify a set of usernames up to or following the first delimiter character, either an at sign (@) or a period (.).

D-Link DWS-1008 CLI Manual

172

Page 175
Image 175
D-Link dws-1008 Clear authentication admin, Clear authentication console, Syntax clear authentication admin user-glob