clear radio-profile

Removes a radio profile or resets one of the profile’s parameters to its default value.

Syntax: clear radio-profile name [parameter]

name

Radio profile name.

parameter

Radio profile parameter:

 

beacon-interval

 

• countermeasures

 

dtim-interval

 

frag-threshold

 

max-rx-lifetime

 

max-tx-lifetime

 

preamble-length

 

rts-threshold

 

service-profile

 

(For information about these parameters, see the set radio-profile

 

commands that use them.)

Defaults If you reset an individual parameter, the parameter is returned to it’s default value.

Access: Enabled

Usage: If you specify a parameter, the setting for the parameter is reset to its default value. The settings of the other parameters are unchanged and the radio profile remains in the configuration. If you do not specify a parameter, the entire radio profile is deleted from the configuration. All radios that use this profile must be disabled before you can delete the profile.

Examples: The following commands disable the radios that are using radio profile rp1 and reset the beaconed-intervalparameter to its default value:

DWS-1008#set radio-profile rp1 mode disable

DWS-1008# clear radio-profile rp1 beacon-intervalsuccess: change accepted.

The following commands disable the radios that are using radio profile rptest and remove the profile:

DWS-1008#set radio-profile rptest mode disable

DWS-1008# clear radio-profile rptest success: change accepted.

D-Link DWS-1008 CLI Manual

309

Page 312
Image 312
D-Link dws-1008 manual Clear radio-profile, Syntax clear radio-profile name parameter