D-Link dws-1008 manual DWS-1008#show spantree statistics, False, Inactive

Examples: The following command shows STP statistics for port 1:

DWS-1008#show spantree statistics 1

BPDU related parameters

Port 1	VLAN 1
spanning tree enabled for VLAN = 1
port spanning tree		enabled
state		Forwarding
port_id		0x8015
port_number		0x15
path cost		0x4
message age (port/VLAN)		0(20)
designated_root		00-0b-0e-00-04-30
designated cost		0x0
designated_bridge		00-0b-0e-00-04-30
designated_port		38
top_change_ack		FALSE
config_pending		FALSE
port_inconsistency		none
Port based information statistics
config BPDU’s xmitted(port/VLAN)		0 (1)
config BPDU’s received(port/VLAN)		21825 (43649)
tcn BPDU’s xmitted(port/VLAN)		0 (0)
tcn BPDU’s received(port/VLAN)		2 (2)
forward transition count (port/VLAN)		1 (1)
scp failure count		0
root inc trans count (port/VLAN)		1 (1)
inhibit loopguard		FALSE
loop inc trans count		0 (0)
Status of Port Timers
forward delay timer		INACTIVE
forward delay timer value		15
message age timer		ACTIVE
message age timer value		0
topology change timer		INACTIVE
topology change timer value		0
hold timer		INACTIVE
hold timer value		0
delay root port timer		INACTIVE
delay root port timer value		0
delay root port timer restarted is		FALSE

D-Link DWS-1008 CLI Manual 445