D-Link DWS-1008 CLI Manual 520
Defaults: None.
Access: Boot prompt.
Usage: To display the system image software versions, use the fver command. This command does
not list the boot code versions. To display the boot code versions, use the version command.
Examples: The following command displays all the boot code and system image files on a
DWS-1008 switch:
boot> dir
Internal Compact Flash Directory (Primary):
MX010101.020 5523634 bytes
BLOAD 696176 bytes
BSTRAP 38056 bytes
Internal Compact Flash Directory (Secondary):
MX010101.020 5524593 bytes
See Also:
• fver
• version
fver
Displays the version of a system image file installed in a specific location on a DWS-1008
switch.
Syntax: fver {c: | d: | e: | f: | boot0: | boot1:} [filename]
c: Nonvolatile storage area containing boot partition 0 (primary).
d: Nonvolatile storage area containing boot partition 1 (secondary).
e: Primary partition of the flash card in the flash card slot.
f: Secondary partition of the flash card in the flash card slot.
boot0: Boot partition 0.
boot1: Boot partition 1.
[filename] System image filename.
Defaults: None.
Access: Boot prompt.
Usage: To display the image filenames, use the dir command. This command does not list the
boot code versions. To display the boot code versions, use the version command.