set authentication admin

Configures authentication and defines where it is performed for specified users with administrative access through Telnet or Web View.

Syntax: set authentication admin user-glob method1 [method2] [method3] [method4]

user-globSingle user or set of users with administrative access over the network through Telnet or Web View. Specify a username, use the double-asterisk wildcard character

(**)to specify all usernames, or use the single-asterisk wildcard character (*) to specify a set of usernames up to or following the first delimiter character—either an at sign (@) or a period (.). (For details, see “User Globs” on page 6.)

method1-4At least one of up to four methods that MSS uses to handle authentication. Specify one or more of the following methods in priority order. MSS applies multiple methods in the order you enter them.

A method can be one of the following:

local—Uses the local database of usernames and user groups on the switch for authentication.

server-group-name—Uses the defined group of RADIUS servers for authentication. You can enter up to four names of existing RADIUS server groups as methods.

none—For users with administrative access only, MSS performs no authentication, but prompts for a username and password and accepts any combination of entries, including blanks.

Note: The authentication method none you can specify for administrative access is different from the fallthru authentication type none, which applies only to network access. The authentication method none allows access to the switch by an administrator. The fallthru authentication type none denies access to a network user. For more information, see “Usage.”

Defaults: By default, authentication is deactivated for all admin users. The default authentication method in an admin authentication rule is local. MSS checks the local database for authentication.

Access: Enabled.

D-Link DWS-1008 CLI Manual

186

Page 189
Image 189
D-Link dws-1008 manual Set authentication admin, Link DWS-1008 CLI Manual 186