D-Link DWS-1008 CLI Manual 15
clear banner motd
Syntax: clear banner motd
Defaults: None.
Access: Enabled.
Examples: To clear a banner, type the following command:
DWS-1008> clear banner motd
success: change accepted
Note: As an alternative to clearing the banner, you can overwrite the existing banner with an
empty banner by typing the following command:
set banner motd ^^
clear history
Deletes the command history buffer for the current CLI session.
Syntax: clear history
Defaults: None.
Access: All.
Examples: To clear the history buffer, type the following command:
DWS-1008# clear history
success: command buffer was flushed.
clear prompt
Syntax: clear prompt
Defaults: None.
Access: Enabled.
Examples: To reset the prompt, type the following command:
wildebeest# clear prompt
success: change accepted.
DWS-1008#