D-Link dws-1008 manual Auth-type none md5 sha auth-pass-phrase, String auth-keyhex-string

auth-type {none md5 sha} {auth-pass-phrase

string auth-keyhex-string}

encrypt-type {none des 3des aes} {encrypt-pass-phrase string encrypt-key hex-string}

Specifies the authentication type used to authenticate communications with the remote SNMP engine.

You can specify one of the following:

•none—No authentication is used.

•md5—Message-digest algorithm 5 is used.

•sha—Secure Hashing Algorithm (SHA) is used.

If the authentication type is md5 or sha, you can specify a passphrase or a hexadecimal key.

•To specify a passphrase, use the auth-pass-phrase string option. The string can be from 8 to 32 alphanumeric characters long, with no spaces.

•To specify a key, use the auth-keyhex-stringoption.

Specifies the encryption type used for SNMP traffic. You can specify for SNMP traffic. You can specify one of the following:

•none—No encryption is used. This is the default.

•des—Data Encryption Standard (DES) encryption is used.

•3des—Triple DES encryption is used.

•aes—Advanced Encryption Standard (AES) encryption is used.

If the encryption type is des, 3des, or aes, you can specify a passphrase or a hexadecimal key.

•To specify a passphrase, use the encrypt-pass-phrasestring option. The string can be from 8 to 32 alphanumeric characters long, with no spaces.

•To specify a key, use the encrypt-keyhex-stringoption.

D-Link DWS-1008 CLI Manual 147