D-Link dws-1008 manual Clear radius

Password (shared secret key) used to authenticate to the RADIUS server.

Number of transmission attempts made before declaring an unresponsive RADIUS server unavailable.

Number of seconds to wait for the RADIUS server to respond before retransmitting.

Number of minutes to wait after declaring an unresponsive RADIUS server unavailable before retrying the RADIUS server.

clear radius

Resets parameters that were globally configured for RADIUS servers to their default values.

Syntax: clear radius {deadtime key retransmit timeout} deadtime

key retransmit

timeout

Defaults: Global RADIUS parameters have the following default values:

•deadtime—0 (zero) minutes (The switch does not designate unresponsive RADIUS servers as unavailable.)

•key—No key

•retransmit—3 (the total number of attempts, including the first attempt)

•timeout—5 seconds

Access: Enabled.

Usage: To override the globally set values on a particular RADIUS server, use the set radius server command.

Examples: To reset all global RADIUS parameters to their factory defaults, type the following commands:

DWS-1008# clear radius deadtime success: change accepted.

DWS-1008# clear radius key success: change accepted.

DWS-1008# clear radius retransmit success: change accepted.

DWS-1008# clear radius timeout success: change accepted.

D-Link DWS-1008 CLI Manual 228