D-Link dws-1008 manual Set dot1x wep-rekey-period, Syntax set dot1x wep-rekey-period seconds

WEP broadcast and multicast keys are never rotated.

Causes the broadcast and multicast keys for WEP to be rotated at an interval set by the set dot1x wep-rekey-period for each radio, associated VLAN, and encryption type.The switch generates the new broadcast and multicast keys and pushes the keys to the clients via EAPoL key messages.

set dot1x wep-rekey

Enables or disables Wired Equivalency Privacy (WEP) rekeying for broadcast and multicast encryption keys.

Syntax: set dot1X wep-rekey {enable disable} enable

disable

Defaults: WEP key rotation is enabled, by default.

Access: Enabled.

Usage: Reauthentication is not required for WEP key rotation to take place. Broadcast and multicast keys are always rotated at the same time, so all members of a given radio, VLAN, or encryption type receive the new keys at the same time.

Examples: Type the following command to disable WEP key rotation:

DWS-1008# set dot1x wep-rekey disable success: wep rekeying disabled

See Also:

•set dot1x wep-rekey-period

•show dot1x

set dot1x wep-rekey-period

Sets the interval for rotating the WEP broadcast and multicast keys.

Syntax: set dot1x wep-rekey-period seconds

seconds	Specify a value between 30 and 1,641,600 (19 days).
Defaults: The default is 1800 seconds (30 minutes).
Access: Enabled.

Examples: Type the following command to set the WEP-rekey period to 300 seconds:

DWS-1008# set dot1x wep-rekey-period 300 success: dot1x wep-rekey-period set to 300

D-Link DWS-1008 CLI Manual 252