D-Link dws-1008 Show version, Spantree System Trace Vlan Vlan-fdb, DWS-1008#show config area vlan

•spantree

•system

•trace

•vlan

•vlan-fdb

If you do not specify a configuration area, nondefault information for all areas is displayed.

all Includes configuration items that are set to their default values.

Defaults: None.

Access: Enabled.

Usage: If you do not use one of the optional parameters, configuration commands that set nondefault values are displayed for all configuration areas. If you specify an area, commands are displayed for that area only. If you use the all option, the display also includes commands for configuration items that are set to their default values.

Examples: The following command shows configuration information for VLANs:

DWS-1008#show config area vlan

#Configuration nvgen’d at 2004-5-21 19:36:48

#Image 3.0.0

#Model switch

#Last change occurred at 2004-5-21 18:20:50 set vlan 1 port 1

See Also:

•load config

•save config

show version

Displays software and hardware version information for a switch and, optionally, for any attached access points.

Syntax: show version [details]

details	Includes additional software build information and information about
	the AP access points configured on the switch.
Defaults: None.
Access: All.

D-Link DWS-1008 CLI Manual 304