set dot1x timeout supplicant

Sets the number of seconds that must elapse before the switch times out an authentication session with a supplicant (client).

Syntax: set dot1x timeout supplicant seconds

seconds

Specify a value between 1 and 65,535.

Defaults: The default is 30 seconds.

Access: Enabled.

Examples: Type the following command to set the number of seconds for authentication session timeout to 300:

DWS-1008# set dot1x timeout supplicant 300 success: dot1x supplicant timeout set to 300.

See Also:

clear dot1x timeout auth-server

show dot1x

set dot1x tx-period

Sets the number of seconds that must elapse before the switch retransmits an EAPoL packet.

Syntax: set dot1x tx-period seconds

seconds

Specify a value between 1 and 65,535.

Defaults: The default is 5 seconds.

Access: Enabled.

Examples:Type the following command to set the number of seconds before the switch retransmits an EAPoL packet to 300:

DWS-1008# set dot1x tx-period 300 success: dot1x tx-period set to 300.

See Also:

clear dot1x tx-period

show dot1x

D-Link DWS-1008 CLI Manual

251

Page 254
Image 254
D-Link dws-1008 manual Set dot1x timeout supplicant, Set dot1x tx-period, Syntax set dot1x timeout supplicant seconds