Usage: Use this command if the output of a CLI command is greater than the number of lines allowed by default for a terminal type.

Examples: To set the number of lines displayed to 100, type the following command:

DWS-1008#set length 100

success: screen length for this session set to 100

set license

Installs an upgrade license key on a DWS-1008 switch.

The DWS-1008 can boot and manage up to 32 APs by default.You can increase the AP support to 64, 96, or 128 APs, by installing one or more activation keys.You can install a 32-AP upgrade, 64-AP upgrade, or 96-AP upgrade. If you have already installed a 32-AP or 64-AP upgrade, you can still install additional upgrades.

Syntax: set license activation-key

activation-key

Defaults: None.

Access: Enabled.

Hexadecimal digits generated by the D-Link license server or otherwise provided by D-Link for your switch.

The activation key is based on the switch’s serial number. You can enter the number in either of the following formats:

xxxx-xxxx-xxxx-xxxx-xxxx xxxxxxxxxxxxxxxxxxxx

Usage: This command applies to the DWS-1008.

Examples: To install an activation key for an additional 80 APs, type the following command:

DWS-1008# set license 3B02-D821-6C19-CE8B-F20Esuccess: license accepted

See Also:

• show licenses

D-Link DWS-1008 CLI Manual

21

Page 24
Image 24
D-Link dws-1008 manual Set license, DWS-1008#set length, Syntax set license activation-key, Activation-key, See Also