D-Link dws-1008 manual Set authentication web, Wired

set authentication web

Configures an authentication rule to allow a user to log in to the network using a web page served by the switch. The rule can be activated if the user is not otherwise granted or denied access by 802.1X, or granted access by MAC authentication.

Syntax: set authentication web {ssid ssid-name wired} user-glob method1 [method2] [method3] [method4]

user-glob	A single user or a set of users.
	Specify a username, use the double-asterisk wildcard character (**) to specify
	all usernames, or use the single-asterisk wildcard character (*) to specify a
	set of usernames up to or following the first delimiter character—either an at
	sign (@) or a period (.).
ssid ssid-name	SSID name to which this authentication rule applies. To apply the rule to all
	SSIDs, type any.
wired	Applies this authentication rule specifically to users connected to a wired
	authentication port.
method1-4	At least one and up to four methods that MSS uses to handle authentication.
	Specify one or more of the following methods in priority order. MSS applies
	multiple methods in the order you enter them. A method can be one of the
	following:
	• local—Uses the local database of usernames and user groups on the
	switch for authentication.
	• server-group-name—Uses the defined group of RADIUS servers for
	authentication. You can enter up to four names of existing RADIUS
	server groups as methods. RADIUS servers cannot be used with the
	EAP-TLS protocol. For more information, see “Usage.”

Defaults: By default, authentication is unconfigured for all clients with network access through AP ports or wired authentication ports on the switch. Connection, authorization, and accounting are also disabled for these users. Access Enabled.

D-Link DWS-1008 CLI Manual 195