The table below describes the fields in this display.

Field

Description

 

 

Interface

VLAN name and number.

 

 

 

Status of the DHCP client on this VLAN:

Configuration Status

• Enabled

 

• Disabled

 

 

 

State of the IP interface:

DHCP State

• IF_UP

 

• IF_DOWN

 

 

Lease Allocation

Duration of the address lease.

 

 

Lease Remaining

Number of seconds remaining before the address lease expires.

 

 

IP Address

IP address received from the DHCP server.

 

 

Subnet Mask

Network mask of the IP address received from the DHCP server.

 

 

Default Gateway

Default router (gateway) IP address received from the DHCP server. If the address

is 0.0.0.0, the server did not provide an address.

 

 

 

DHCP Server

IP address of the DHCP server.

 

 

DNS Servers

DNS server IP address(es) received from the DHCP server.

 

 

DNS Domain Name

Default DNS domain name received from the DHCP server.

 

 

See Also:

• set interface dhcp-client

show dhcp-server

Displays MSS DHCP server information.

Syntax: show dhcp-server [interface vlan-id] [verbose]

interface vlan-idDisplays the IP addresses leased by the specified VLAN.

verbose

Displays configuration and status information for the MSS DHCP server.

Defaults: None.

Access: All.

Examples: The following command displays the addresses leased by the MSS DHCP server:

DWS-1008#show dhcp-server

 

 

VLAN Name

Address

MAC

Lease Remaining (sec)

--------------------------------------------------------------------------------------------------------

1

default

10.10.20.2

00:01:02:03:04:05

12345

1

default

10.10.20.3

00:01:03:04:06:07

2103

2

red-vlan

192.168.1.5

00:01:03:04:06:08

102

2

red-vlan

192.168.1.7

00:01:03:04:06:09

16789

D-Link DWS-1008 CLI Manual

120

Page 123
Image 123
D-Link dws-1008 Show dhcp-server, Syntax show dhcp-server interface vlan-id verbose, Verbose, DWS-1008# show dhcp-server