the service profile rnd_lab to web-portal:

DWS-1008# set service-profile rnd_lab auth-fallthruweb-portalsuccess: change accepted.

See Also:

set web-portal

set service-profile web-portal-form

show service-profile

set service-profile auth-psk

Enables preshared key (PSK) authentication of Wi-Fi Protected Access (WPA) clients by AP radios in a radio profile, when the WPA information element (IE) is enabled in the service profile.

Syntax: set service-profile name auth-psk {enable disable}

name

Service profile name.

enable

Enables PSK authentication of WPA clients.

disable

Disables PSK authentication of WPA clients.

Defaults: When the WPA IE is enabled, PSK authentication of WPA clients is enabled by default. If the WPA IE is disabled, the auth-psksetting has no effect.

Access: Enabled.

Usage: This command affects authentication of WPA clients only.

To use PSK authentication, you also must configure a passphrase or key. In addition, you must enable the WPA IE.

Examples: The following command enables PSK authentication for service profile wpa_clients:

DWS-1008# set service-profile wpa_clients auth-psk enable success: change accepted.

See Also:

set service-profile auth-dot1x

set service-profile psk-raw 7

set service-profile wpa-ie

show service-profile

D-Link DWS-1008 CLI Manual

361

Page 364
Image 364
D-Link dws-1008 manual Set service-profile auth-psk, Syntax set service-profile name auth-psk enable disable