Syntax: set service-profile name user-idle-timeout seconds

name

seconds

Service profile name.

Number of seconds a client is allowed to remain idle before MSS changes the session to the Dissociated state. You can specify from 20 to 86400 seconds. To disable the timer, specify 0.

Defaults: The default user idle timeout is 180 seconds (3 minutes).

Access: Enabled.

Examples: The following command increases the user idle timeout to 360 seconds (6 minutes):

DWS-1008# set service-profile sp1 user-idle-timeout 360 success: change accepted.

See Also:

set service-profile idle-client-probing

set service-profile web-portal-session-timeout

show service-profile

set service-profile web-portal-acl

Changes the ACL name MSS uses to filter a Web-Portal user’s traffic during authentication.

Use this command if you create a custom Web-Portal ACL to allow more than just DHCP traffic during authentication. For example, if you configure an ACL that allows a Web-Portal user to access a credit card server, use this command to use the custom ACL for Web-Portal users that associate with the service profile’s SSID.

Syntax: set service-profile name web-portal-acl aclname

name Service profile name.

aclname Name of the ACL to use for filtering Web-Portal user traffic during authentication.

Defaults: By default, a service profile’s web-portal-acloption is unset. However,when you change the service profile’s auth-fallthruoption to web-portal, MSSsets the web-portal-acloption to portalacl. (MSS automatically creates the portalacl ACL the first time you set any service profile’s auth-fallthruoption to web-portal.)

D-Link DWS-1008 CLI Manual

389

Page 392
Image 392
D-Link dws-1008 manual Set service-profile web-portal-acl, Syntax set service-profile name user-idle-timeout seconds