Changes the bridge priority on all VLANs.
VLAN name or number. MSS changes the bridge priority on only the specified VLAN.
Priority value. You can specify a value from 0 through 65,535. The bridge with the lowest priority value is elected to be the root bridge for the spanning tree.

Defaults: The default STP priority for all network ports is 128.

Access: Enabled.

Examples: The following command sets the priority of ports 3 and 4 to 48 on VLAN mauve:

DWS-1008# set spantree portvlanpri 3-4 priority 48 vlan mauve success: change accepted.

See Also:

clear spantree portpri

clear spantree portvlanpri

set spantree portpri

show spantree

set spantree priority

Changes the STP root bridge priority of a DWS-1008 switch on one or all of its VLANs.

Syntax: set spantree priority value {all vlan vlan-id} priority value

all

vlan vlan-id

Defaults: The default root bridge priority for the switch on all VLANs is 32,768.

Access: Enabled.

Examples: The following command sets the bridge priority of VLAN pink to 69:

DWS-1008# set spantree priority 69 vlan pink success: change accepted.

See Also:

show spantree

D-Link DWS-1008 CLI Manual

438

Page 441
Image 441
D-Link dws-1008 manual Set spantree priority, Show spantree Link DWS-1008 CLI Manual 438