show snoop

Displays the AP radio mapping for all snoop filters.

Syntax: show snoop

Defaults: None.

Access: Enabled.

Usage: To display the mappings for a specific AP radio, use the show snoop map command.

Examples: The following command shows the AP radio mappings for all snoop filters configured on a DWS-1008 switch:

DWS-1008# show snoop Dap: 3 Radio: 2 snoop1

snoop2

Dap: 2 Radio: 2 snoop2

See Also:

clear snoop map

set snoop map

show snoop map

show snoop info

Shows the configured snoop filters.

Syntax: show snoop filter-name

filter-nameName of the snoop filter.

Defaults: None.

Access: Enabled.

Examples: The following command shows the snoop filters configured in the examples above:

DWS-1008#show snoop info snoop1:

observer 10.10.30.2 snap-length 100 all packets

snoop2:

observer 10.10.30.3 snap-length 100 frame-type eq data

mac-pair (aa:bb:cc:dd:ee:ff, 11:22:33:44:55:66)

See Also:

clear snoop

set snoop

D-Link DWS-1008 CLI Manual

502

Page 505
Image 505
D-Link dws-1008 manual Show snoop info, Syntax show snoop Defaults None Access Enabled, Syntax show snoop filter-name