D-Link dws-1008 manual Link DWS-1008 CLI Manual 427

Field	Description
Shared Key Auth	Indicates whether shared-key authentication is enabled.
	Indicates that the Wi-Fi Protected Access (WPA) or Robust Security Network
	(RSN) information element (IE) is enabled. Additional fields display the settings
	of other WPA or RSN parameters:
	• ciphers—Lists the cipher suites advertised by radios in the radio profile mapped
	to this service profile.
WPA enabled	• authentication—Lists the authentication methods supported for WPA or RSN
	clients:
or	• 802.1X—dynamic authentication
RSN enabled	• PSK—preshared key authentication
	• TKIP countermeasures time—Indicates the amount of time (in ms) MSS
	enforces countermeasures following a second message integrity code
	(MIC) failure within a 60-second period.
	Note: These fields are displayed only when the WPA IE or RSN IE is enabled.
	These are examples of authorization attributes that are applied by default to
vlan-name,	a user accessing the SSID managed by this service profile (in addition to any
	attributes assigned to the user by a RADIUS server or the local database).
session-timeout,
service-type	Attributes are listed here only if they have been configured as default attribute
	settings for the service profile.
	Data transmission rate settings for each radio type:
	• beacon rate—Data rate of beacon frames sent by AP radios.
	• multicast rate—Data rate of multicast frames sent by AP radios. If the rate is
	auto, the AP sets the multicast rate to the highest rate that can reach all clients
	connected to the radio.
11a / 11b / 11g transmit	• mandatory rates—Set of data transmission rates that clients are required to
rate fields	support in order to associate with an SSID on an AP radio. A client must
	support at least one of the mandatory rates.
	• standard rates—The set of valid rates that are neither mandatory nor disabled.
	These rates are supported for data transmission from the AP radios.
	• disabled rates—Data transmission rates that AP radios will not use to transmit
	data. (The radios will still accept frames from clients at disabled data rates.)

D-Link DWS-1008 CLI Manual 427