D-Link DWS-1008 CLI Manual 59
VLAN Commands
Use virtual LAN (VLAN) commands to configure and manage parameters for individual port VLANs on
network ports, and to display information about clients within a network. This chapter presents VLAN
commands alphabetically. Use the following table to locate commands in this chapter based on their
use.
Creation set vlan name on page 66
Ports set vlan port on page 67
clear vlan on page 62
show vlan config on page 71
Restriction of Client
Layer 2 Forwarding set security l2-restrict on page 65
show security l2-restrict on page 70
clear security l2-restrict on page 61
clear security l2-restrict counters on page 62
FDB Entries set fdb on page 64
show fdb on page 68
show fdb count on page 70
clear fdb on page 60
FDB Aging Timeout set fdb agingtime on page 65
show fdb agingtime on page 69