8 How to use OSD |
SPECIAL FEATURE
1.OSD H POSITION
Use ◄►to move OSD horizontal position.
2.OSD V POSITION
Use ◄►to move OSD vertical position.
3.OSD TIMEOUT
Use◄►to set up OSD display time, the value range is 15 seconds to 49 seconds.
After press the
MENU key, the
OSD will appear.
4.LANGUAGE
Set OSD display language, there are three language options:
ENGLISH
FRANÇAIS
ESPAÑOL
5.SYSTEM INFO
Display some information about the display, may also be displayed by pressing the hotkey INFO on the remote control.
♦ MODEL NUMBER
Show the display’s model number
♦ MAIN INPUT
Display the input signal of current main picture
♦ WIDE FORMAT (MAIN)
Display main picture’s aspect ratio (Refer to page 25)
♦ PIP INPUT
Display the input signal of current main picture
♦ LAMP TIME
Display the time the lamp has consumed.
♦ SOFTWARE VERSION
Display the display’s software version
6.RESET ALL SETTING
Select YES to return all OSD settings to the defult values, the LAMP timer and OSD display language will not be affected. Select NO to stay unchanged.
7.RESET LAMP TIMER
Select YES to set the time lamp consumed to zero. Select NO to stay unchanged.
When installing a new lamp, be sure to set the LAMP TIMER to zero. This ensures correct display of the time consumed by the lamp.
If the OSD TIMEOUT is set to 30 seconds, OSD screen will automatically disappear in 30 seconds if not any key is pressed.
28
8.SLEEP TIMER =remote control key "SLEEP"
Set up the time to turn off the display, works the same as the hotkey SLEEP on the remote control. The sleep timer will be reset to zero every time when the display restarts. If it is set to 30 minutes, this means in 30 minutes from the timer is set, the display will be turned off automatically. If the timer is set to OFF, the function will be disabled.
