LED Status | 13 |
There are two status LEDs on the front of your Micro Chip Display Projection RP TV.
You may obtain the display’s related status through the LED in the front panel. Their meanings are explained as follows:
Power LED
Lamp LED
Normal Operation
States | Power LED | Lamp LED | Status Description |
AC off | Not lit | Not lit | AC power not connected |
|
|
|
|
Standby mode | Orange | Not lit | AC power is connected and your RPTV is in |
|
|
| standby mode. |
|
|
|
|
Blue | Flashing | AC power is connected and the power button has | |
|
|
| just been turned on or off. |
|
|
|
|
Operation mode | Blue | Not lit | AC power is connected, the power button has |
|
|
| been pressed, and the lamp has warmed up |
Error Codes
States | Power LED | Lamp LED | Status Description |
21 | Flashes blue twice, | Not lit | One of the cooling fans has failed. Call Service |
| then orange once |
| Center to help you solve the question. |
|
|
|
|
32 | Flashes blue three | Flashing | Lamp trouble or failure. Your RPTV automatically |
| times, then orange |
| shut down and restart itself. If this does not solve |
| twice. |
| the problem, Call Service Center to help you solve |
|
|
| the question. |
|
|
|
|
52 | Flashes blue five | Flashing | Hardware error. Shut off your RPTV, wait one |
| times, then orange |
| minute, then restart your RPTV. If this does not |
| twice. |
| solve the problem,Call Service Center to help you |
|
|
| solve the question. |
43
