How to use OSD | 8 |
Before use OSD, You must know:
Recommended ways to learn about operations
Before starting, please follow the suggested steps to understand the fundamentals of operating the display, and then you will be able to learn the operations in a short time:
1.Please first learn to power on and power off the display. Refer to page 18 for the descriptions of the operations.
2.Please learn how to operate the OSD.
3.Understand what each OSD menu is. Refer to page 20~28 for an explanation of the OSD contents.
Example how to select correct input signal source.
After power on the display, first step: you need to select the correct input signal source. The screen will be blank without any images with incorrect input signal source. Follow the steps to set up:
1.Use OSD to select the correct input source, press the MENU key and bring up the OSD menu.
2.Use ▲▼ keys to select the “INPUT SETUP” option , press OK to enter the submenu.
Press OK to enter the Submenu
3.Then the OSD will show the Submenu as below:
4.Press OK , then press ◄ ► to change the main input source, last pressOK again to exit this main input setup.
Follow the OSD's indicate to operate the OSD. For example:
1.Use ▲▼ key to select the item "Main Input" , "PIP INPUT" or "INPUT SIGNAL"
2.then use OK to enter the item that you select.
eg: use ▲▼ to select MAIN INPUT, press ok then use
◄► to select input source TV, DTV....
3.If you want to exit the submenu, press EXIT on remote control to main menu or Menu key to exit OSD.
5.Now you understand:
Just to press the MENU key to show the OSD
And follow the OSD buttom line's information to operat the OSD. So you only need MENU, EXIT , OK, ▲▼ ◄► , ENTER these keys to control the whole OSD.
If you still have any question, please call our service center to help you.
Quick Input Source select way
For Main Input |
| |
Press the INPUT key in the front control panel or remote control repeatedly, the input signal mode will appear on |
| |
the top left corner, please select correct input signal mode.(Refer to Input relative page 13~15,24) COMP1 |
| |
For PIP Input | 19 | |
Please refer to page 24. | ||
|
