D-Link dws-1008 manual Sets the time of day and date on the switch, Link DWS-1008 CLI Manual 151

System time, in hours, minutes, and seconds.

set timedate

Sets the time of day and date on the switch.

Syntax: set timedate {date mmm dd yyyy [time hh:mm:ss]}

date mmm dd yyyy	System date:
	• mmm—month.
	• dd—day.
	• yyyy—year.

time hh:mm:ss Defaults: None. Access: Enabled.

Usage: The day of week is automatically calculated from the day you set. The time displayed by the CLI after you type the command might be slightly later than the time you enter due to the interval between when you press Enter and when the CLI reads and displays the new time and date.

Configure summertime before you set the time and date. Otherwise, summertime’s adjustment of the time will make the time incorrect, if the date is within the summertime period.

Examples: The following command sets the date to March 13, 2003 and time to 11:11:12:

DWS-1008#set timedate date feb 29 2004 time 23:58:00

Time now is: Sun Feb 29 2004, 23:58:02 PST

See Also:

•clear summertime

•clear timezone

•set summertime

•set timezone

•show summertime

•show timedate

•show timezone

set timezone

Sets the number of hours, and optionally the number of minutes, that the switch’s real-time clock is offset from Coordinated Universal Time (UTC). These values are also used by Network Time Protocol (NTP), if it is enabled.

Syntax: set timezone zone-name{-hours[minutes]}

D-Link DWS-1008 CLI Manual 151