D-Link dws-1008 manual End

weekday	Day of the week to start or end the time change. Valid values are sun,
	mon, tue, wed, thu, fri, and sat.
month	Month of the year to start or end the time change. Valid values are jan, feb,
	mar, apr, may, jun, jul, aug, sep, oct, nov, and dec.
hour	Hour to start or end the time change—a value between 0 and 23 on the
	24-hour clock.
min	Minute to start or end the time change—a value between 0 and 59.
end	End of the time change period.

Defaults: If you do not specify a start and end time, the system implements the time change starting at 2:00 a.m. on the first Sunday in April and ending at 2:00 a.m. on the last Sunday in October, according to the North American standard.

Access: Enabled.

Usage: You must first set the time zone with the set timezone command for the offset to work properly without the start and end values. Configure summertime before you set the time and date. Otherwise, summertime’s adjustment of the time will make the time incorrect, if the date is within the summertime period.

Examples: To enable summertime and set the summertime time zone to PDT (Pacific Daylight Time), type the following command:

DWS-1008# set summertime PDT success: change accepted

See Also:

•clear summertime

•clear timezone

•set timedate

•set timezone

•show summertime

•show timedate

•show timezone

D-Link DWS-1008 CLI Manual 149