D-Link dws-1008 manual Clear dot1x timeout auth-server, Clear dot1x timeout supplicant

clear dot1x timeout auth-server

Resets to the default setting the number of seconds that must elapse before the switch times out a request to a RADIUS server.

Syntax: clear dot1x reauth-period

Defaults: The default is 30 seconds.

Access: Enabled.

Examples: To reset the default timeout for requests to an authentication server, type the following command:

DWS-1008# clear dot1x timeout auth-serversuccess: change accepted

See Also:

•set dot1x timeout auth-server

•show dot1x

clear dot1x timeout supplicant

Resets to the default setting the number of seconds that must elapse before the switch times out an authentication session with a supplicant (client).

Syntax: clear dot1x timeout supplicant

Defaults: The default for the authentication timeout sessions is 30 seconds.

Access: Enabled.

Examples: Type the following command to reset the timeout period for an authentication session:

DWS-1008# clear dot1x timeout supplicant success: change accepted

See Also:

•set dot1x timeout supplicant

•show dot1x

D-Link DWS-1008 CLI Manual 244