D-Link dws-1008 manual Mac, Web, Wired, Start-stop, Stop-only

dot1x	Users with network access through the switch who are authenticated by
	802.1X.
mac	Users with network access through the switch who are authenticated by MAC
	authentication.
web	Users with network access through the switch who are authenticated by
	WebAAA.
ssid ssid-name	SSID name to which this accounting rule applies. To apply the rule to all SSIDs,
	type any.
wired	Applies this accounting rule specifically to users who are authenticated on a
	wired authentication port.
user-glob	Single user or set of users with administrative access or network access.
	Specify a username, use the double-asterisk wildcard character (**) to specify
	all usernames, or use the single-asterisk wildcard character (*) to specify a set
	of usernames up to or following the first delimiter character—either an at sign
	(@) or a period (.). (For details, see “User Globs” on page 6.)
	Note: This option does not apply if mac or last-resort is specified. For mac,
	specify a mac-addr-glob.
mac-addr-glob	A single user or set of users with access via a MAC address. Specify a MAC
	address, or use the wildcard (*) character to specify a set of MAC addresses.
	(For details, see “MAC Address Globs” on page 7.) This option applies only
	when mac is specified.
start-stop	Sends accounting records at the start and end of a network session.
stop-only	Sends accounting records only at the end of a network session.
method1-4	At least one of up to four methods that MSS uses to process accounting
	records. Specify one or more of the following methods in priority order. If the
	first method does not succeed, MSS tries the second method, and so on.
	A method can be one of the following:

•local—Stores accounting records in the local database on the switch. When the local accounting storage space is full, MSS overwrites older records with new ones.

•server-group-name—Stores accounting records on one or more Remote Authentication Dial-In User Service (RADIUS) servers. You can also enter the names of existing RADIUS server groups as methods.

D-Link DWS-1008 CLI Manual 184