delete

Removes the currently active boot profile.

Syntax: delete

Defaults: None.

Access: Boot prompt.

Usage: When you type the delete command, the next-lower numbered boot profile becomes the active profile. For example, if the currently active profile is number 3, profile number 2 becomes active after you type delete to delete profile 3. You cannot delete boot profile 0.

Examples: To remove the currently active boot profile, type the following command:

boot> delete BOOT Index: 1 BOOT TYPE: c DEVICE: boot1: FILENAME: default FLAGS: 00000000 OPTIONS: run=nos;boot=0

See Also:

change

create

next

show

dhcp

Displays or changes the state of the DHCP option. The DHCP option controls whether a switch uses DCHP to obtain its IP address when it is booted using a TFTP server.

Syntax: dhcp [ON on OFF off]

ON Enables the DHCP option. on Same effect as ON.

OFF Disables the DHCP option. off Same effect as OFF.

D-Link DWS-1008 CLI Manual

518

Page 521
Image 521
D-Link dws-1008 Dhcp, Removes the currently active boot profile, Syntax delete Defaults None, Change Create Next Show