D-Link dws-1008 manual Clear snoop map, Set snoop, Radio 1 of the AP

clear snoop map

Removes a snoop filter from an AP radio.

Examples: clear snoop map filter-namedap dap-numradio {1 2}

filter-nameName of the snoop filter.

dap dap-num	Number of a Distributed AP to which to snoop filter is mapped.
radio 1	Radio 1 of the AP.
radio 2	Radio 2 of the AP. (This option does not apply to single-radio models.)
Defaults: None.
Access: Enabled.

Examples: The following command removes snoop filter snoop2 from radio 2 on Distributed AP 3:

DWS-1008# clear snoop map snoop2 dap 3 radio 2 success: change accepted.

The following command removes all snoop filter mappings from all radios:

DWS-1008# clear snoop map all success: change accepted.

See Also:

•set snoop map

•show snoop

•show snoop map

set snoop

Configures a snoop filter.

Syntax: set snoop filter-name[condition-list] [observer ip-addr] [snap-length num]

filter-name	Name for the filter. The name can be up to 15 alphanumeric characters,
	with no spaces.

D-Link DWS-1008 CLI Manual 497