D-Link dws-1008 manual DWS-1008#show ap status

The following command displays the status of a Distributed AP access point:

DWS-1008#show ap status 1

Port: 1, AP model: DWL-8220AP, manufacturer D-Link, name: AP01

====================================================

State: operational CPU info: IBM:PPC speed=266666664 Hz version=405GPr id=0x28b08a1e047f1d0f ram=33554432 s/n=0333000288 hw_rev=A3

Uptime: 3 hours, 44 minutes, 28 seconds

Radio 1 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)

operational channel: 1 operational power: 15 base mac: 00:0b:0e:00:d1:00

bssid1: 00:0b:0e:00:d1:00, ssid: public bssid2: 00:0b:0e:00:d1:02, ssid: empl-net

bssid3: 00:0b:0e:00:d1:04, ssid: mycorp-tkip

Radio 2 type: 802.11a, state: configure succeed [Enabled]

operational channel: 48 operational power: 11 base mac: 00:0b:0e:00:d1:01

bssid1: 00:0b:0e:00:d1:01, ssid: public bssid2: 00:0b:0e:00:d1:03, ssid: empl-net

bssid3: 00:0b:0e:00:d1:05, ssid: mycorp-tkip

The following command uses the terse option to display brief information for Distributed APs:

DWS-1008# show dap status terse Total number of entries: 4

Operational: 1, Image Downloading: 0, Unknown: 3, Other: 0

Flags: o = operational, b = booting, d = image downloading c = configuring, f = configuration failed a = auto DAP, i = insecure

Port	Flg	IP Address	Model	Mac Address	Radio 1	Radio 2	Uptime
3	---		DWL-8220AP		D ?/?	D ?/?	0d	0h	0m 0s
Dap 1	---		DWL-8220AP		D ?/?	D ?/?	0d	0h	0m 0s
Dap 2	---		DWL-8220AP		D ?/?	D ?/?	0d	0h	0m 0s
Dap100	oa-	10.8.255.11	DWL-8220AP	00:0b:0e:da:da:82	E 1/17	E36/11	0d	0h	0m17s

The following table describe the fields in these displays:

D-Link DWS-1008 CLI Manual 409