set radio-profile countermeasures

Countermeasures affect wireless service on a radio. When an AP radio is sending countermeasures, the radio is disabled for use by network traffic, until the radio finishes sending the countermeasures.

Enables or disables countermeasures for on the DWL-8220AP radios managed by a radio profile. Countermeasures are packets sent by a radio to prevent clients from being able to use rogue access points.

DWL-8220AP radios can also issue countermeasures against interfering devices. An interfering device is not part of the D-Link network but also is not a rogue. No client connected to the device has been detected communicating with any network entity listed in the forwarding database (FDD) of any DWS-1008 switch in the MobileLAN. Although the interfering device is not connected to your network, the device might be causing RF interference with

DWL-8220AP radios.

Syntax: set radio-profile name countermeasures {all rogue configured none}

name

Radio profile name.

all

Configures radios to attack rogues and interfering devices.

rogue

Configures radios to attack rogues only.

configured

Configures radios to attack only devices in the attack list on the DWS-1008

 

(on-demand countermeasures). When this option is specified, devices found to

 

be rogues by other means, such as policy violations or by determining that the

 

device is providing connectivity to the wired network, are not attacked.

none

Disables countermeasures for this radio profile.

Defaults: Countermeasures are disabled by default.

Access: Enabled.

Examples: The following command enables countermeasures in radio profile radprof3 for rogues only:

DWS-1008# set radio-profile radprof3 countermeasures rogue success: change accepted.

The following command disables countermeasures in radio profile radprof3:

DWS-1008# clear radio-profile radprof3 countermeasures success: change accepted.

D-Link DWS-1008 CLI Manual

342

Page 345
Image 345
D-Link dws-1008 manual Set radio-profile countermeasures, Rogue, Configured, None