D-Link dws-1008 manual Set dap auto mode, Syntax set dap auto mode enable disable Enable

Examples: The following command creates a profile for automatic Distributed AP configuration:

DWS-1008# set dap auto success: change accepted.

See Also:

•set dap auto mode

•set dap auto persistent

•set dap auto radiotype

•set {ap dap} bias

•set {ap dap} blink

•set {ap dap} group

•set {ap dap} radio auto-tune max-power

•set {ap dap} radio mode

•set {ap dap} radio radio-profile

•set {ap dap} upgrade-firmware

set dap auto mode

Enables an DWS-1008’s profile for automatic Distributed AP configuration.

Syntax: set dap auto mode {enable disable}

enable	Enables the AP configuration profile.
disable	Disables the AP configuration profile.

Defaults: The AP configuration profile is disabled by default.

Access: Enabled

Usage: You must use the set dap auto command to create the profile before you can enable it.

Examples: The following command enables the profile for automatic Distributed AP configuration:

DWS-1008# set dap auto mode enable success: change accepted.

D-Link DWS-1008 CLI Manual 313