rollback security acl

Clears changes made to the security ACL edit buffer since it was last saved. The ACL is rolled back to its state after the last commit security acl command was entered. All uncommitted ACLs in the edit buffer are cleared.

Syntax: rollback security acl {acl-name all}

acl-nameName of an existing security ACL to roll back. ACL names must start with a letter and are case-insensitive.

all

Rolls back all security ACLs in the edit buffer, clearing all uncommitted ACEs.

Defaults: None.

Access: Enabled.

Examples: The following commands show the edit buffer before a rollback, clear any changes in the edit buffer to security acl_122, and show the edit buffer after the rollback:

DWS-1008#show security acl info all editbuffer

ACL edit-buffer information for all

set security acl ip acl_122 (ACEs 3, add 3, del 0, modified 0)

-----------------------------------------------------------------------------------------------

1.permit IP source IP 20.0.1.11 0.0.0.255 destination IP any enable-hits

2.deny IP source IP 20.0.2.11 0.0.0.0 destination IP any

3.deny SRC source IP 192.168.1.234 255.255.255.255 enable-hits

DWS-1008#rollback security acl acl_122

DWS-1008#show security acl info all editbuffer

ACL edit-buffer information for all

See Also:

• show security acl

D-Link DWS-1008 CLI Manual

474

Page 477
Image 477
D-Link dws-1008 Rollback security acl, Syntax rollback security acl acl-name all, ACL edit-buffer information for all