Defaults: Disabled.

Access: Enabled.

Usage: If the SODA agent checks fail on a client, by default the client is disconnected from the network. Optionally, you can specify a failure page for the client to load (with the set service-profile soda failure-page command). When the failure page is loaded, you can optionally specify a remediation ACL to apply to the client. The remediation ACL can be used to grant the client limited access to network resources, for example. If there is no remediation ACL configured, then the client is disconnected from the network when the failure page is loaded.

This functionality occurs only when the enforce checks option is enabled for the service profile. The enforce checks option is enabled by default.

Examples: The following command configures the DWS-1008 to apply acl-1to a client when it loads the failure page:

DWS-1008# set service-profile sp1 soda remediation-aclacl-1success: change accepted.

See Also:

set service-profile soda enforce-checks

set service-profile soda failure-page

show service-profile

set service-profile soda success-page

Specifies a page on the DWL-1008 switch that is loaded when a client passes the security checks performed by the SODA agent.

Syntax: set service-profile name soda success-page page

name

Service profile name.

page

Page that is loaded if the client passes the security checks performed by the

 

SODA agent.

Defaults: By default, the DWL-1008 switch generates a page indicating that the client passed the SODA agent checks.

Access: Enabled.

Usage: Use this command to specify a custom page that is loaded by the client when it passes the checks performed by the SODA agent. After this page is loaded, the client is placed in its assigned VLAN and granted access to the network.

D-Link DWS-1008 CLI Manual

382

Page 385
Image 385
D-Link dws-1008 manual Set service-profile soda success-page, Syntax set service-profile name soda success-page