D-Link DWS-1008 CLI Manual 461
IGMP message type Received Transmitted Dropped
----------------------------------------------------------------------------------------
General-Queries 0 0 0
GS-Queries 0 0 0
Report V1 0 0 0
Report V2 5 1 4
Leave 0 0 0
Mrouter-Adv 0 0 0
Mrouter-Term 0 0 0
Mrouter-Sol 50 101 0
DVMRP 4 4 0
PIM V1 0 0 0
PIM V2 0 0 0
Topology notifications: 0
Packets with unknown IGMP type: 0
Packets with bad length: 0
Packets with bad checksum: 0
Packets dropped: 4
The table below describes the fields in this display.
Field Description
VLAN VLAN name. MSS displays information separately for each VLAN.
IGMP is enabled (disabled) IGMP state.
Proxy reporting Proxy reporting state.
Mrouter solicitation Multicast router solicitation state.
Querier functionality Pseudo-querier state.
Configuration values (qi) Query interval.
Configuration values (oqi) Other-querier-present interval.
Configuration values (qri) Query response interval.
Configuration values (lmqi) Last member query interval.
Configuration values (rvalue) Robustness value.
Multicast router information
List of multicast routers and active multicast groups. The fields containing this
information are descr ibed separately. The show igmp mrouter command shows the
same information.
Port Number of the physical port through which the switch can reach the router.
Mrouter-IPaddr IP address of the multicast router interface.
Mrouter-MAC MAC address of the multicast router interface.
Type
How the switch learned that the port is a multicast router port:
• conf — Static multicast port configured by an administrator
• madv—Multicast advertisement
• quer—IGMP query
• dvmrp—Distance Vector Multicast Routing Protocol (DVMRP)
• pimv1—Protocol Independent Multicast (PIM) version 1
• pimv2—PIM version 2