D-Link dws-1008 - page 29

D-Link DWS-1008 CLI Manual 26
Access: Enabled.
Usage: This command applies to all types of CLI management sessions: console,
Telnet, and SSH. The timeout change applies to existing sessions only, not to new
sessions.
Examples: The following command sets the idle timeout to 1800 seconds (one half hour):
DWS-1008# set system idle-timeout 1800
success: change accepted.
See Also:
• clear system
• show system
set system ip-address
Sets the system IP address so that it can be used by various services in the DWS-1008
switch.
Syntax: set system ip-address ip-addr
ip-addr IP address, in dotted decimal notation.
Defaults: None.
Access: Enabled.
Examples: The following command sets the IP address of the DWS switch to 192.168.253.1:
DWS-1008# set system ip-address 192.168.253.1
success: change accepted.
See Also:
• clear system
• set interface
• show system