Field

Description

Memory

Current size (in megabytes) of nonvolatile memory (NVRAM) and

 

synchronous dynamic RAM (SDRAM), plus the percentage of total memory

 

space in use, in the following format:

 

NVRAM size /SDRAM size (percent of total)

Total Power Over

Total power that the DWS-1008 is currently supplying to its directly connected

Ethernet

access points, in watts.

See Also:

clear system

set system contact

set system countrycode

set system idle-timeout

set system ip-address

set system location

show system name

show tech-support

Provides an in-depth snapshot of the status of the DWS switch, which includes details about the boot image, the version, ports, and other configuration values. This command also displays the last 100 log messages.

Syntax: show tech-support [file [subdirname/] filename]

[subdirname/]filename Optional subdirectory name, and a string up to 32 alphanumeric characters. The command’s output is saved into a file with the specified name in nonvolatile storage.

Defaults: None.

Access: Enabled.

Usage: Enter this command before calling D-Link Technical Support.

Examples: To store the location of the DWS-1008 switch in the switch’s configuration, type the following command:

DWS-1008# set system location first-floor-bldg3success: change accepted.

See Also:

show boot

show config

set licenses

D-Link DWS-1008 CLI Manual

32

Page 35
Image 35
D-Link dws-1008 manual Show tech-support, Nvram size /SDRAM size percent of total