D-Link dws-1008 manual Install soda agent, Table below describes the fields in the dir output

The table below describes the fields in the dir output.

Field	Description
	Filename or subdirectory name.
	For files, the directory name is shown in front of the filename (for example, file:
	configuration). The file: directory is the root directory.
Filename	For subdirectories, a forward slash is shown at the end of the subdirectory name (for
	example, old/).
	In the boot partitions list (Boot:), an asterisk (*) indicates the boot partition from
	which the currently running image was loaded and the image filename.
Size	Size in Kbytes or bytes.
Created	System time and date when the file was created or copied onto the switch.
Total	Number of kilobytes in use to store files and the number that are still free.

install soda agent

Installs Sygate On-Demand (SODA) agent files in a directory on the switch.

Syntax: install soda agent agent-fileagent-directory directory

agent-file	Name of a .zip file on the switch containing SODA agent files.
directory	Directory on the switch where SODA agent files are to be
	installed. The command automatically creates this directory.
Defaults: None.
Access: Enabled.

Usage: Use this command to install a .zip file containing SODA agent files into a directory on the switch. Prior to installing the SODA agent files, you must have already copied the .zip file to the switch. This command creates the specified directory, unzips the file and places the contents into the directory. If the specified directory has the same name as an SSID, then that SSID uses the SODA agent files in the directory if SODA functionality is enabled for the service profile that manages the SSID.

Examples: The following command installs the contents of the file soda.ZIP into a directory called sp1.

DWS-1008#install soda agent soda.ZIP agent-directory sp1

This command may take up to 20 seconds...

See Also:

•uninstall soda agent

•set service-profile soda mode

D-Link DWS-1008 CLI Manual 294