D-Link DWS-1008 CLI Manual 211The table below describes the fields that can appear in show aaa output.
Field Description
Default Values RADIUS default values for all parameters.
authport UDP port on the switch for transmission of RADIUS authorization and authentication
messages. The default port is 1812.
acctport UDP port on the switch for transmission of RADIUS accounting records. The default is
port 1813.
timeout Number of seconds the switch waits for a RADIUS server to respond before retransmitting.
The default is 5 seconds.
acct-timeout Number of seconds the switch waits for a RADIUS ser ver to respond to an accounting
request before retransmitting. The default is 5 seconds.
retrans Number of times the switch retransmits a message before determining a RADIUS server
unresponsive. The default is 3 times.
deadtime
Number of minutes the switch waits after determining a RADIUS server is unresponsive
before trying to reconnect with this server. During the dead time, the RADIUS server is
ignored by the switch. The default is 0 minutes.
key Shared secret key, or password, used to authenticate to a RADIUS ser ver. The default
is no key (null).
author-pass
Password used for authorization to a RADIUS server for MAC authentication. The
client’s MAC address is sent as the username and the author-pass string is sent as the
password.
Radius Servers Information about active RADIUS servers.
Server Name of each RADIUS server currently active.
Addr IP address of each RADIUS server currently active.
Ports UDP ports that the switch uses for authentication messages and for accounting
records.
T/o Setting of timeouts on each RADIUS server currently active.
Tries Number of retransmissions configured for each RADIUS server currently active. The
default is 3 times.
Dead Length of time until the server is considered responsive again.
State
Current state of each RADIUS server currently active:
• UP (operating)
• DOWN (unavailable)
Server groups Names of RADIUS server groups and member servers configured on the switch.
Web Portal
State of the WebAAA feature:
• enabled
• disabled
set commands List of commands used to configure AAA on the switch.
user and user group profiles List of user and user group profiles stored in the local database on the switch.
See Also:• set accounting {admin | console} • set authentication admin• set authentication console• set authentication dot1x• set authentication mac • set authentication web